? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 termination insensitive mixer, 1 mhz - 3.5 ghz rev. v5 md- / mdc- / mds-169 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? intermodulation ratio is insensitive to port mismatches ? vswr: <2.0:1 typical midband ? isolation: 35 db typical midband ? impedance: 50 ohms nominal ? maximum input power: 350 mw max @ 25c, derated to 85c @ 3.2 mw/c ? lo power: +24 dbm max. ? mil-std-883 screening available description the unique design of the termination insensitive mixer (tim) enables it to apply high reverse voltage to diodes during their ?off? phase, in the lo cycle. this allows for higher power level performance with minimum distortion. in addition the tim has internal loads that provide a good match and also absorb mixer generated lo frequency terms. combined, these features give the mixer its insensitivity to external mismatches, plus superior vswr. fp-2 (md-169) c-7 (MDC-169) sf-1 (mds-169)
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 termination insensitive mixer, 1 mhz - 3.5 ghz rev. v5 md- / mdc- / mds-169 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications 1 : t a = -55c to +85c parameter test conditions frequency units min typ max frequency range rf, lo ports if port 0.001 - 3.5 5 - 1500 ghz mhz ? ? ? ? ? ? conversion loss 5 - 1000 mhz 2 5 - 3000 mhz 3 1 - 3500 mhz db db db ? ? ? ? ? ? 7 8 10 isolation lo to rf 5 - 1000 mhz 1 - 3500 mhz db db 30 20 ? ? ? ? lo to if 5 - 1000 mhz 1 - 3500 mhz db db 30 20 ? ? ? ? rf to if 10 - 500 mhz 1 - 3000 mhz 1 - 3500 mhz db db db 30 20 18 ? ? ? ? ? ? rf input 1 db compression 1 db desensitization ? ? dbm dbm ? ? +7 +5 ? ? ssb noise figure within 1 db of conversion loss max ? ? ? ? ? typical two-tone im ratio pin = ?10 dbm per tone if = 60 mhz 10 mhz 500 mhz 3000 mhz db db db ? ? ? 55 58 56 ? ? ? 3rd order intermodulation ratio degradation @ if vswr 3:1 ? db ? 3 ? 1. all specifications apply when operated at +10 dbm av ailable lo power with 50 ohm source and load impedance. 2. for if frequencies of 5 - 300 mhz and rf of ?10 dbm or less. 3. for MDC-169, add 1.0 db to conversion loss. parameter test conditions frequency units min typ max conversion loss lo @ +10 dbm if @ 60 mhz 5 - 1000 mhz 1000 - 3000 mhz 1 - 3500 mhz db db db ? ? ? 6.5 7.5 8.0 7.0 9.0 10.0 isolation lo to rf 5 - 1000 mhz 1 - 3500 mhz db db 30 20 35 25 ? ? lo to if 5 - 1000 mhz 1 - 3500 mhz db db 30 20 35 25 ? ? rf to if 10 - 500 mhz 1 - 3000 mhz 1 - 3500 mhz db db db 30 20 18 35 25 23 ? ? ? electrical specifications (mds-169): t a = -55c to +85c frequency: rf, lo ports = 1 - 3500 mhz, if port = 5-1500 mhz
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 termination insensitive mixer, 1 mhz - 3.5 ghz rev. v5 md- / mdc- / mds-169 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. pin configuration (md-169) pin no. function pin no. function 1 gnd 5 lo 2 gnd 6 gnd 3 gnd 7 gnd 4 if 8 rf bottom view of sf-1 pin configuration (mds-169) pin no. function pin no. function 1 gnd 3 lo 2 if 4 rf parameter absolute maximum max input power 5 total power 350 mw derated at 85 o c @ 3.2 mw/ o c lo power +24 dbm absolute maximum ratings (mds-169) 4 4. operation of this device above any one of these parameters may cause permanent damage. 5. ambient temperature (t a ) = +25 o c typical performance curves
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 4 termination insensitive mixer, 1 mhz - 3.5 ghz rev. v5 md- / mdc- / mds-169 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves ordering information part number package md-169 pin fp-2 MDC-169 sma c-7 mds-169 sf-1
|
